English
Inflatable Playground Repair
24-01-2019
14:51
HOW TO DO MINOR REPAIRS
If the product truly needs repair, it means your inflatable playpen has been overloaded during use. Do not use this product for children older than 11 years old.
Always make sure you don't get children (simply put, no taller than the outer walls).
REPAIR USING ADHESIVE
1. Turn off the product.
2. Clean the area to be repaired (patched) from oil and dirt.
3. Make sure the area to be repaired is flat.
4. Cut your patch fabric into a circle that is larger than the damaged area.
5. Before pouring the adhesive onto your inflatable playpen, apply it to both areas where it will be attached.
6. Allow the adhesive to dry for approximately five to ten minutes.
7. If possible, heat the dried adhesive with a hairdryer and place the patch over the tear.
8. Place a weight on the treated area and leave it there for 1-2 hours to allow it to fuse.
Click here for the inflatable park repair adhesive kit.
REPAIR USING SEWING THREAD
All you need is some thread (we can send you some) and a sewing needle.
1. Deflate your inflatable playground.
2. Firmly grasp the damaged area with your hand and sew in circles. Since the fabric is thick, you can use pliers and a needle to thread it through the fabric if necessary.
3. Finally, tie a knot with a needle to complete the process.
Click here for inflatable park repair rope and needle set.
If the product truly needs repair, it means your inflatable playpen has been overloaded during use. Do not use this product for children older than 11 years old.
Always make sure you don't get children (simply put, no taller than the outer walls).
REPAIR USING ADHESIVE
1. Turn off the product.
2. Clean the area to be repaired (patched) from oil and dirt.
3. Make sure the area to be repaired is flat.
4. Cut your patch fabric into a circle that is larger than the damaged area.
5. Before pouring the adhesive onto your inflatable playpen, apply it to both areas where it will be attached.
6. Allow the adhesive to dry for approximately five to ten minutes.
7. If possible, heat the dried adhesive with a hairdryer and place the patch over the tear.
8. Place a weight on the treated area and leave it there for 1-2 hours to allow it to fuse.
Click here for the inflatable park repair adhesive kit.
REPAIR USING SEWING THREAD
All you need is some thread (we can send you some) and a sewing needle.
1. Deflate your inflatable playground.
2. Firmly grasp the damaged area with your hand and sew in circles. Since the fabric is thick, you can use pliers and a needle to thread it through the fabric if necessary.
3. Finally, tie a knot with a needle to complete the process.
Click here for inflatable park repair rope and needle set.